What are the key points for using acrylic acoustic magnetic anti-theft doors？
1. The acoustic magnetic anti-theft device cannot be powered by a voltage stabilizer, generator or UPS. Because the voltage stabilizer, generator and UPS are intermittent power supplies and not regular power sources, they cannot meet the standard power supply. Therefore, it will cause a sensitivity disturbance to the main control unit of the acoustic magnetic anti-theft device, resulting in missed alarms or false alarms. In severe cases, it may even lead to the burning out of equipment and components.
2. When installing and wiring all acrylic acoustic magnetic anti-theft door equipment, it is essential to operate with the power off. Otherwise, it is very easy to burn out the main control and detector matching boards.
3. During use, if the voltage in the shopping mall is unstable, the power supply of the anti-theft door should be turned off. Wait until the voltage stabilizes before opening it for use. If the voltage is unstable, it may cause false alarms or missed alarms of the anti-theft door, and in severe cases, it may burn out the main board.
4. It is necessary to pay attention to whether the mast or the wiring points are loose. If the mast is loose, it is essential to contact the after-sales technical department for prompt repair to avoid false alarms and missed alarms.
5. During the usage process, it is also necessary to be careful not to place any miscellaneous items on the horn of the security door to avoid blocking the horn hole and causing a low alarm sound.
6. Always pay attention to the sensitivity of the anti-theft device. Once the sensitivity is low, contact the after-sales technical maintenance immediately to increase the sensitivity.
7. When you find that the anti-theft device keeps sounding the alarm, first check if there are anti-theft clasps around the anti-theft door or remove the clothes with anti-theft clasps around to eliminate the cause. If a continuous alarm occurs, it is usually caused by the detection of a nearby anti-theft buckle.
8. If you find that the anti-theft lock does not alarm when passing through the anti-theft door, try several more anti-theft locks. Check if any individual anti-theft buckles are damaged. Check whether the anti-theft door is powered on. If the anti-theft door does not sound an alarm when multiple anti-theft locks pass by while it is powered on, contact the after-sales technical team to go to the site for inspection and handling.
9. Do not hang anti-theft buttons on clothes within 1.5 meters around the anti-theft device. The anti-theft buttons will transmit signal sources to the anti-theft door, disturbing its normal operation and causing false or random alarms from the anti-theft device.
10. When the store closes at night, please turn off the power supply of the anti-theft door. It opens when the business is open in the morning.
