Minelab GOLD MONSTER 1000 Metal Detector

Minelab GOLD MONSTER 1000 Metal Detector

Minelab GOLD MONSTER 1000 metal detector with GM 10 (10" x 6" Double-D) & GM 05 (5" Double‑D) search coils, Headphones, Lithium-Ion Battery, Two-Year Warranty.

The Minelab GOLD MONSTER 1000 Easy-to-Use High-Performance Metal Detector features fully automatic operation and comes with a choice of coils, battery options, and shaft configurations. If you're looking for super sensitive gold performance at a great price, then this is the detector you've been waiting for!

Highly Recommended for - Coin Hunting, Jewelry Hunting, Relic Hunting, Cache Hunting, Prospecting, Ghost Town Hunting, Competition Events, Beach/Fresh Water Hunting

Minelab GOLD MONSTER 1000 metal detector includes the following items:

GM 10 (10" x 6" Double-D) Search Coil

GM 05 (5" Double‑D) Search Coil

Headphones

Lithium-Ion Battery

Two-Year Warranty

The Minelab GOLD MONSTER 1000 Easy-to-Use High-Performance Metal Detector features fully automatic operation and comes with a choice of coils, battery options, and shaft configurations. If you're looking for super sensitive gold performance at a great price, then this is the detector you've been waiting for!

Up until now, there has always been a compromise between frequency and sensitivity when optimizing detector performance, because lower frequencies are more sensitive to larger gold nuggets and higher frequencies are more sensitive to smaller gold nuggets.

When comparing detectors, the three curves in the diagram represent each detector’s ability to find small gold nuggets of a certain size, at a maximum possible depth. Most detectors will find a very large nugget just beneath the surface, however a detector’s sensitivity to gold determines how many smaller nuggets will ultimately be recovered in difficult (noisy) ground at greater depths.

An 18 kHz detector will normally have a depth advantage on nuggets ≥ 1.0g over a basic mid-frequency detector, and a 71 kHz detector will have a depth advantage on nuggets ≤ 0.1g. The advanced GOLD MONSTER 1000 uses an intermediate 45 kHz frequency AND a high speed 24-bit signal processor. This primary combination greatly boosts sensitivity to gold beyond that of other single frequency VLF detectors over a wide range of nugget sizes, without introducing excess noise and false signals.

The GOLD MONSTER 1000 also has improved ferrous/non-ferrous discrimination and copes better with conductive (salty) soils than higher frequency detectors, making it the perfect choice to maximize your gold recovery!

Features

Fully automatic operation

Extra sensitive 45 kHz VLF performance

Highly adaptable

2 search coils included

Easy quick start

Automatic noise cancel

Digital electronics

Auto ground balance

Faster processor

Automatic sensitivity

Easy-to-Use Controls

Gold Chance Indicator

Detect Modes: Gold (Iron Reject) & Deep All-Metal

Sensitivity Options: Manual sensitivity, and two auto options; Auto, and Auto+

Adjustable Volume: Adjust to suit your hearing, with 6 volume levels

Waterproof coil (to 1m/3')/ Rain proof control box

Specification

Key Technology: Ultra-wide dynamic range 45kHz VLF

Detect Modes: Gold (Iron reject), Deep All-Metal

Discrimination: Gold Chance Indicator (high/low)

Ground Balance: Automatic (Easy-Trak)

Noise Cancel: Automatic (On start-up)

Sensitivity Adjust: Manual (1–10), Auto (11), Auto+ (12)

Volume Adjust: Manual 1–6

Visual Display: Monochrome LCD

Detector Length: 1382mm–944mm (54.4"–37.2")

Detector Weight (with10" × 6" coil): 1.33kg (2.94lbs) (excluding battery)

Audio Output: Internal speaker or headphones 3.5mm (1/8")

Coils (standard): GM 10 (10" x 6" Double-D), GM 05 (5" Double‑D)

Waterproof/Splashproof: Coils waterproof to 1m (3'), Control box rain/splash-proof

Battery options: Li-Ion (included), 8 × AA Batteries (not included)

Warranty: 2 years control box & coil