TERASCANESH-10HANDHELDMETALDETECTOR
USER MANUAL
First Time Operation
To Operatethe Detector
1)Install the Batteries
a.Usea9-Volt ALKALINE or Ni-Cd battery
b.Install battery with correct polanty(align"+"ondetector housing with*+on battery)
c.The battery cover opens and closes with a screwdriver
2)Setthe Sound/Vibrate switch to "sound and "Vibrate"
a.Forward position(S):Sound ON
b.Center position(O):Power OFF
c.Back position(V):Vibrate ON
3)Sweep the Detector over the target area.
Detector must be IN MOTION to detect metal
4)Read this manual for proper training in the detection metal objects
Batteries
·Use 9-Volt ALKALINE or Ni-Cd battery
Low Battery Alert
·The RED LED indicator light will illuminate and remain illuminated when the batteries are discharged to the point at which the detector has lost 10% of its metal detecting range.
·The sound alert will also lengthen(the tone will sound for a longer period of time) upon detection of metal objects, when the batteries become discharged to the point at which the detector has lost 10% of its metal detecting range.
·The detector will continue to operate.at a lower sensitivity, when the Low Battery Indicators are activated.
Replace batteries as soon as possible after these indicators activate.
LED Indicators
·The RED light indcates LOW BATTERY
·The YELLOW light indicates the detection of a metal object
The GREEN light indicates that the detector is ON Charger Jack
